The stall model is designed for use by dairy cattle.
Total length of the stall approximately 2100 mm.
Spacing elements are attached by a robust flange clamp to a vertical post sunk into the casting of the floor.
The front part of the stall is completely open, but if needed a horizontal pipe or neck ribbon can be installed in front of the vertical posts to prevent walking through the stall.
The height can be adjusted according to the stall bedding used.
When a plastic- or rubber cushion is used at the front of the stall bedding, the neck pipe can be adjusted to a more forward position than normal.
As an end element either a concrete-filled plastic profile or a plywood end element that attaches to the casting of the floor